Products
Being Honesty, Doing the Best,
 and Long-lasting Development
Products Products
Products / Products
发布时间: 2018 - 01 - 16
Product PresentationBeautiful appearance, simple operation, low energy consumption, long working life, uniform drying, easy to maintain, is more advanced granulation equipment, the product is suitable for cold, hot granulation and high, medium and low concentrations of fertilizer the large-scale production. Working principleBy the main motor-driven belt and pulley, through the reduction gear transmission to the drive shaft by mounting gear off the driving shaft and fixed in the body of a large ring gear teeth together, work opposite. Material from the feed end joined by interior of the cylinder. The role of the internal cylinder through a special structure, which was made of particles, and finally through the spout. Due continue to enter the material, constantly rotating granulator be...
发布时间: 2018 - 01 - 16
Product PresentationOrganic fertilizer mixing granulator can produce organic raw material into a particular shapes.Belongs to Wet mixing granulating type ,using mechanical stirring force and high-speed rotation of the resulting aerodynamic,the fine powdery material in the machine to achieve continuous mixing, granulating, balling, dense and other processes, so as to achieve the purpose of granulation . This type design can  granulate particles into a ball rate is higher, the particles are more beautiful, meanwhile saving energy. Working PrincipleBelongs to Wet mixing granulating type ,using mechanical stirring force and high-speed rotation of the resulting aerodynamic,the fine powdery material in the machine to achieve continuous mixing, granulating, balling, ...
发布时间: 2018 - 01 - 16
Product PresentationDouble roller granulator is the key equipment of compound fertilizer granulation, with advanced technology, reasonable design, compact, innovative and practical, low energy consumption, work with the corresponding equipment, consisting of small-scale production line, capable of forming a certain production capacity continuous , mechanized production. Using eugenic formulas, without drying,working at room temperature, one time rolling molding. compound fertilizer product quality in line with technical requirements, it is used in the production of various crops of high, medium and low concentration of compound fertilizer and special fertilizer industry energy saving replacements. Working PrincipleThis series of double roller granulator's working p...
Contact
Tel: 0086 13526470520
Email: info@ms-machinery.com
   
Cyclone Dust Collector
产品名称:

Cyclone Dust Collector

上市日期: 2018-01-16

Cyclone Separator are ideal for separating dust with particle size greater than 5 um. Cyclone Separator provides a very cost effective solution to the problems of dust collection, materials and for conveying bark and chips. It uses centrifugal force for the separation of particles.

Product Presentation

Cyclone Separator are ideal for separating dust with particle size greater than 5 um. Cyclone Separator provides a very cost effective solution to the problems of dust collection, materials and for conveying bark and chips. Cyclone Separator unit basically consists of a cylindrical and a conical portion. As the dust leaden air enters the inlet port, it spirals downwards in an outer vortex and comes out of the unit in an inner vortex. It uses centrifugal force for the separation of particles. Centrifugal action causes the air material to move around the inside walls of the cyclone, from where the material drops by force of gravity at the bottom leaving the air to escape through the top.


Cyclone Dust Collector


Performance Features

1. Easy operation maintenance.Single baghouse . 

2. Assembled when EX work from our factory and no more  intallation work needed.

3. High filtration efficiency up to 99.99% , low  emission < 30 mg/ M3.

4. Energy saving 

5. Lower system resistance up to < 1000 pa.

 

Cyclone Dust Collector


Working Principle

Cyclone dust collector is composed of intake pipe, exhaust pipe, cylinder, cone and ash bucket. Cyclone dust collector is simple, easy to manufacture, installation and maintenance management, equipment investment and operating costs are low, has been widely used in separation of solid and liquid particles from the air, or from the liquid separation of solid particles. Under normal operating conditions, the centrifugal force acting on the particles is 5 to 2,500 times the gravity, so the efficiency of the cyclone is significantly higher than that of the gravity settling chamber. The use of this principle based on the successful development of a dust removal efficiency of more than ninety percent of the cyclone dust removal device. In the mechanical dust collector, the cyclone dust collector is the most efficient one. It is suitable for the removal of non-viscous and non-fibrous dust, mostly used to remove more than 5μm particles, parallel multi-cyclone device for 3μm particles also have 80 ~ 85% of the dust removal efficiency. Selection of high temperature, wear and corrosion resistance of the special metal or ceramic materials constructed cyclone dust collector, can be as high as 1000 ℃, the pressure of 500 × 105Pa under the conditions of operation. From the technical and economic aspects of the cyclone dust collector pressure loss control range is generally 500 ~ 2000Pa. Therefore, it belongs to the effect of dust, and can be used for high temperature flue gas purification, is widely used as a dust collector, and more used in boiler flue dust, multi-stage dust and pre-dust. Its main drawback is the small dust particles (<5μm) removal efficiency is low. 


Technical Parameter

Model

Air Volume(m3/h)

Resistance(Pa)

Inlet Air Speed(m/s)

Overall Size

Weight(kg)

XP-200

370~590

800~2160

14~22

Φ200×940

37

XP-300

840~1320

800~2160

14~22

Φ300×1360

54

XP-400

1500~2340

800~2160

14~22

Φ400×1780

85

XP-500

2340~3660

800~2160

14~22

Φ500×2200

132

XP-600

3370~5290

800~2160

14~22

Φ600×2620

183

XP-700

4600~7200

800~2160

14~22

Φ700×3030

252

 XP-800

5950~9350

800~2160

14~22

Φ 800×3450

 325

XP-900

7650~11890

800~2160

14~22

Φ900×3870

400

XP-1000 

 9340~14630

800~2160

14~22

Φ1000×4280

 500

 


Product Recommendation / Case 更多>>
地址:中国·深圳·宝安中心区·宝源路F518时尚创意园15栋3层

  

 
传真:+86 0755-2788 8009
邮编:330520
TEL: 0086 13526470520
Wechat ID:Zero679555
E-mail: info@ms-machinery.com
Office Adress:XingYang industrial district, ZhengZhou city, HeNan province,china 
  • *Content:
  • *
  • Name:
  • *
  • *E-mail:
  • *
  • *TEL:
  • *
  • 公司名称:
  • *
  • 地址:
  • *
  • 传真:
  • *
  • 邮政编码:
  • *
  • 留言主题:
  • *
     
Friendship Link:
Copyright ©2017 - 2018 Henan machinery&equipment Co., Ltd

Wechat ID:Zero679555
犀牛云提供企业云服务