Why choose GATE vertical crusher and its advantages

Vertical pulverizer is divided into chain type hammer type and blade type three.Used for comminution of organic fertilizer raw materials and returned materials, also suitable for comminution of materials with relatively low moisture content, such as free acid <5% calcium phosphate fertilizer.Vertical pulverizer is widely used, can be used to crush organic fertilizer, livestock and poultry feces, also can be used for limestone, cement clinker, mixture, gypsum, coal gangue, slag, copper ore, iron ore and other materials crushing, as mentioned above is suitable for fertilizer and dressing equipment crushing and crushing.
The working process of vertical pulverizer: the material enters from the feed port, collides with the high-speed rotating chain hammer in the machine shell, after the material is impacted, it is squeezed and broken, and then hits the inner wall of the machine shell to fight back and then collides with the chain hammer, in this way, after several times of impact in the process of falling into powder from the bottom.

vertical crusher

Vertical crusher structure: chain structure consists of chassis, shaft, shaft, hammer, chain of hammer bracket, motor and other parts. The power coupling drive spindle, spindle bearing, bearing installed on the top of the chassis, hammer hammer on the spindle is equipped with chain, chain bracket, hopper installed on the upper casing, convenient for loading and unloading chain hammer, casing open valve, easy disassembling and maintenance.

Features of vertical pulverizer
The inner wall of this machine is lined with stainless steel, which relieves the problem of sticking to the wall and not easy to clean up.the hammer piece is forged and pressed by special steel, which is resistant to wear and corrosion, and can effectively prolong the service life and improve the production efficiency.this machine of vertical pulverizer has the characteristics of reasonable structure, simple operation, strong applicability and convenient maintenance.
(1) simple and reasonable structure and low operating cost.Using the principle of stone beating, small wear.
(2) high crushing rate and energy saving.
(3) with fine, coarse grinding function.
(4) materials with less than 50 percent water content and little influence by water content of materials can be crushed.
(5) working noise is less than 75 db (db level), with less dust pollution.
(6) suitable for crushing medium hard and extra hard materials.
(7) impeller self-lining wear small, easy maintenance.
(8) the inner wall of the vertical pulverizer adopts polypropylene board as the inner lining, the crushing material does not stick to the wall and is easy to clean..
(9) vertical grinder blade made of special steel tilia, can effectively improve production efficiency.
(10) the machine has reasonable structure, convenient operation and strong applicability.

vertical crusher

Product structure and composition:
The structure has the lower frame, the casing, the chain vertical mill, the upper and lower shaft seat, the spindle, the rotor disk, the vertical mill, the chain, the blade, the belt, the electric frame and so on partial composition.The power drives the spindle to rotate through the triangle belt. The spindle has two upper and lower bearing blocks, which are installed in the upper and lower end of the housing.The chassis assembly is installed on the lower frame, the main shaft is equipped with rotor disc and chain, and the feeding port is on the upper part of the chassis. In order to facilitate the loading and unloading of hammer head, the valve is opened on the chassis for easy disassembly and maintenance.

vertical crusher