High efficiency Chicken manure fertilizer cooling machine

Technical parameters of fertilizer cooling machine

Model(mm) Installation amgles(%) Rotary speed(r/min) Inlet temperature(℃) Powder(kw) Capacity(t/h) Weight(t)
Ф600×6000 3-5 3-8 ≤700 3 0.5-1.5 2.9
Ф800×8000 3-5 3-8 ≤700 4 0.8-2.5 4.5
Ф1000×10000 3-5 3-8 ≤700 5.5 1.0-3.5 5.6
Ф1200×10000 3-5 3-8 ≤700 7.5 1.8-5 14.5
Ф1500×12000 3-5 2-6 ≤800 15 3.5-9 17.8
Ф1800×12000 3-5 2-6 ≤800 18 5-12 25
Ф2200×12000 3-5 1.5-6 ≤800 18.5 6-15 33
Ф2400×20000 3-5 1.5-5 ≤800 37 18-30 60
Ф3000×20000 3-5 1.5-5 ≤800 55 25-35 78

Application range of fertilizer cooling machine

The drum ffertilizer cooling machine is a cooler that handles large quantities of material. Due to its reliable operation, flexible operation, strong adaptability and large processing capacity, it is widely used in metallurgy, building materials, food, light industry, chemical industry, coal, pharmaceutical and mining industries. Chicken manure fertilizer coolers are generally adapted to granular materials and can also be used to cool sticky paste materials or materials with higher temperatures. Rotary ffertilizer cooling machine are used in conjunction with dryers to greatly increase cooling rate, reduce labor intensity, increase production, further remove some moisture and reduce the pellet temperature of compound fertilizers.

How does the fertilizer cooling machine work?

The dried wet material is sent to the hopper by a belt conveyor or a bucket elevator, and then fed through the hopper through the feeding pipe into the feeding end. The slope of the feeding pipe is greater than the natural inclination of the material so that the material flows smoothly into the fertilizer cooling machine. The cooler cylinder is a rotating cylinder that is slightly inclined to the horizontal. The material is added from the higher end, the heat carrier flows out from the lower end, and is in countercurrent contact with the material, and the heat carrier and the material are simultaneously flowed into the cylinder. As the rotating material of the fertilizer cooling machine cylinder is moved by gravity to the lower end. During the forward movement of the wet material in the cylinder body, the heat supply of the heat carrier is directly or indirectly obtained, so that the hot material is cooled, and then sent out at the discharge end through a belt conveyor or a screw conveyor.

A copy board is arranged on the inner wall of the fertilizer cooling cylinder, and its function is to copy and sprinkle the material, so that the contact surface of the material and the air flow is increased to increase the cooling rate and promote the advancement of the material. The cooling body is divided into cold air and the like. After the heating medium passes through the fertilizer cooling machine, a cyclone dust collector is generally required to collect the materials in the gas. If you want to further reduce the dust content of the exhaust gas, you should also discharge it after passing the bag filter or the wet dust collector.